Configuring the Inspection System Service

The order in which the steps are done is not important; it is possible to go back to an earlier step and make changes later if required.

Steps	Description
Step 1:	The first step is to configure a DVCA Server as an External CA in CA Manager. Use the CA Type 'EAC Document Verifier (DV) Server' for the DVCA.
Step 2:	The second step is to create an Inspection System client in the Client Manager module, to establish the communication with the configured DVCA over a TLS communication. We will configure client certificates for both Document Verifier (DV) and Inspection System in the Client Manager.
Step 3:	The third step is to configure and trust the required CVCA and DVCA certificates in the Trust Manager.
Step 4:	The fourth step is to generate an Inspection System key and its corresponding certificate in the Key Manager.
Step 5	The fifth step is to configure the Service Manager in the Inspection System Service.
Step 6	The sixth step is to create the Inspection System Profile.
Step 7	The final step is to register one or more client applications within the Client Manager. These can now be authorised to make requests to one or more Inspection System Profiles.