Using the Service Manager
The CRL Monitor Service is started and stopped via the Service Manager.
The configuration items are as follows:
| Item | Description |
| Service Address | The address of the CRL Monitor Service being controlled from this Service Manager. Ensure the address points to the correct service URL, i.e. if you are running the service on multiple machines in a load-balanced configuration then check that the name is correct for the particular instance that needs to be started/stopped/restarted. By default it will be that of the local machine. |
| Start | Start the service. Status will change to “Running” after a successful start |
| Stop | Stop the service. Status will change to “Stopped” after the service is stopped. |
| Restart | Stop and then start the service in one go, Status will change to “Running” after a successful restart. |
| Daily Summary Report Location | This defines the path to the location where Scenario Reports will be stored. |
| Daily Summary Report Settings | This allows you to define the time at which Daily Report Summary is created. Note that the widget shows A.M. and P.M. times on separate tabs. You can select (and deselect) the system operators to whom report is sent. Operators are defined in the Access Control module. |
Ensure all the changes are saved by clicking the Save button and restart the service to take changes effect.
See also