Configuring the SPOC Service
Before using SPOC Service in ADSS Server, some configuration steps need to be performed. Following are main steps to be taken when configuring the ADSS SPOC Service. The order in which the steps are defined is not important since it is easy to go back to an earlier step and also make changes later if required.
| Steps | Description |
| Step 1 |
Use the Service Manager to configure ADSS SPOC Service. The Service Manager can be used to start, stop or restart the SPOC Service. |
| Step 2 | Create and configure national CVCA inside Register CVCA sub-module. |
| Step 3 |
Configure Foreign SPOCs in ADSS Server to communicate with foreign SPOCs. |
| Step 4 |
Configure one or more SPOC Profiles for selecting the relevant CVCA and request processing modes (Automatic/Manual). |
| Step 5 |
Register one or more client applications within the Client Manager. These can now be authorised to make requests to SPOC Service. |
Each of these steps is described in the sections that follow:
