Home > ADSS RAS Service > Configuring the RAS Service

Configuring the RAS Service

These are the steps to be taken when configuring the ADSS RAS Service. 
  
The order in which the steps are done is not important; it is possible to go back to an earlier step and make changes later if required.

Steps Description
Step 1 Configure one or more RAS Profiles that will be relevant for managing users, signing keys, authorised devices, authorisation requests, signing requests, getting the signed hash (i.e. PKCS#1 signature) and their current statuses. Client applications refer to the RAS Profile within their request messages sent to the ADSS RAS Service.  
Step 2 Register one or more client applications within the Client Manager. These can now be authorised to make requests to one or more RAS Profiles. 
Step 3 Configure the Email & SMS Settings which will be used to send the OTPs to the user's registered email address and mobile number for user device registration.
Step 4
Use the ADSS RAS Service Manager to start/stop/restart the service. ADSS RAS Service is required to be restarted when either there is a change in RAS service manager configurations or a RAS Profile is added/updated/deleted.

Each of these is described in the sections that follow:

Step 1 - Configuring RAS Profile
Step 2 - Registering Business Applications
Step 3 - Configuring Notification Settings
Step 4 - Using the Service Manager