Configuring the LTANS Service
Following are main steps to be taken when configuring the ADSS LTANS Service. The order in which the steps are defined is not important since it is possible to go back to an earlier step and also make changes if required.
| Steps | Description |
| Step 1: |
Register time stamp authorities in the Global Settings > Timestamping section to timestamp the archives. |
| Step 2: |
Configure relevant LTANS profile(s) to define the archiving settings. |
| Step 3: |
Register your client application(s) within the Client Manager so that they can make requests to the ADSS LTANS Service |
| Step 4: |
Use the ADSS LTANS Service Manager to start/stop the service and make other service related settings. |
Each of these steps is described in the sections that follow:
