Home > ADSS Go>Sign Service > Configuring the Go>Sign Service

Configuring the Go>Sign Service

Following are main steps to be taken when configuring the ADSS Go>Sign Service. The order in which the steps are defined is not important since it is easy to go back to an earlier step and also make changes later if required.

Steps Description
Step 1:
Configure one or more Go>Sign Profiles that will be relevant for the signing operations on PDF, XML or other files or data objects and certification operation. Client applications refer to the Go>Sign Profile within their request messages sent to the ADSS  Go>Sign Service.
Step 2: Register one or more client applications within the Client Manager. These can now be authorised to make requests to one or more Go>Sign Service Profiles.
Step 3: Use the ADSS Go>Sign Service Manager to start/stop/restart the service. ADSS Go>Sign Service is required to be restarted when a Go>Sign Profile is added/updated/deleted.

Each of these steps is described in the sections that follow:

Step 1 - Creating a Go-Sign Profile
Step 2 - Registering Business Applications
Step 3 - Using the Service Manager

See also