Renewal Requests
ADSS Web RA supports certificate renewal before a certificate expires. It is the process by which you can renew a certificate for the same public key used in an expiring certificate.
All certificate renewal requests submitted from the Admin portal appear in the Renewal Requests listing.
To view the renewal request listing, expand Requests > Renewal Requests from the left-tree menu in the Admin portal.

The following section describes how to renew a certificate that is nearing its expiration.
How to Renew a Certificate
To renew a certificate before its expiration, you need to first open the certificate request generated from the Web RA system.
To do this, expand Requests > Certificate Requests from the left-tree menu in the Admin portal.
Then, click the request number of the certificate that you want to renew. Alternatively, click the three-dot button next to the certificate request entry and select the 'View Request' option.
The system will then open the certificate request in View mode.

To renew the certificate, click the 'More Actions' button. A dialog titled 'Certificate Action' will appear on the screen.

Click the 'Action' dropdown and select the 'Renew Certificate' option.
|
|
Note: The 'Renew Certificate' option appears in this dropdown only if the 'Renew Certificate' policy is selected in Configurations > Policies > Requests section under the certificate renewal settings. |

After selecting the required option, select the 'I have renewed and verified the renewal request' checkbox and click the 'Renew' button.

The certificate will be renewed, and the system will display a 'Certificate Renewed' alert on the screen.

Each certificate can be renewed only up to the renewal limit configured in the certification profile. For example, if a renewal limit of 1 is configured in the certification profile, a certificate can only be renewed once. Any subsequent attempt to renew the same certificate will result in an error being displayed by the system.
The following error will appear on the screen if you attempt to renew a certificate after the renewal limit has been reached.

|
|
Note: If the renewal limit is set to zero in the certification profile, certificates generated under that certification profile cannot be renewed. |
How to Approve a Renewal Request Submitted from Web Portal
Expand Requests > Renewal Requests from the left-tree menu in the Admin Portal. The system displays the ‘Renewal Requests’ listing screen.
|
|
Note: Renewal requests submitted through the Web Portal appear on this screen for approval only if vetting is enabled in the associated certification profile. |

Click the three-dot
button next to the renewal request that you want to approve and select ‘View Request’. The system will open the Renewal Request. Alternatively, you can click the Request No. of the renewal request to access it.
|
|
Note: If the “Vertical Certificate Request Layout for Operators policy” is enabled in the Configurations > Policies > Requests section, the reissue request details will be displayed in a vertical layout to the operator. All sections will appear on a single page, allowing the operator to view the complete information by scrolling up and down. Once the operator approves the rekey request, the request continues to appear in the vertical layout on the current screen. However, if the operator closes the approved request and opens it again, the request is displayed using the default layout settings. |

After reviewing the information, click ‘Approve’. The system will display the ‘Certificate Renew’ dialog on the screen.

Select the ‘I have reviewed and verified the renewal request’ checkbox. You can also add an optional message related to the renewal request in the Message box.
After that, click the ‘Renew’ button. The certificate will be renewed and a success alert will appear on the screen.
|
|
Note: If dual control is enabled for the Requests module, the reissue request is forwarded to the dual control operator for review after the operator approves it. |
