Home > ADSS Certification Service > Alerts

Alerts

The service can be configured to generate email, SMS and/or SNMP alerts when the following events occur:

• Failure to create the certificate
• Failed to communicate with directory
• An internal error occurred
• If the service is unable to use log signing key at auto-archiving time
• When archiving is successfully completed

System operators who will receive these alerts can be configured here as well.

The configuration items are as follows:

Items	Description
Failed to create the certificate	ADSS Certification Service sends an alert to the relevant operators when it fails to create a certificate for whatever reason.
Failed to communicate with the directory	When Active Directory is unable to communicate with Certification Service due to some network failure, ADSS Server sends an alert to the operator.
Internal error occurred	When enabled, the ADSS Certification Service sends an alert when an internal error has occurred during processing of a certification request (e.g. database is not accessible).
Unable to use log signing Key at auto-archiving time	When enabled, an alert is sent whenever system is unable to use the Log Signing Key at auto-archiving time. Note: The Log Signing Key is configured in Global Settings module.
When archiving is performed	When enabled, service will send an alert whenever auto-archiving is performed.
>> and <<	These buttons are used to select and deselect system operators to whom alerts are sent. Operators in the "Selected Operators" list will receive the configured alerts

Click Save button for the changes to take effect.

See also